This is the 2nd setup using the 3
meter steel bar next to the wooden top aspect setup. The steel bar is about 2
foot lower and at about 5 O'clock looking at the CCD sections. both ends of the
steel bar rest on 25 Kg concrete slabs and are secured with multiple
cords.
These
are readings from closely matched images from the steel and woooden bar. As the
wooden bar is 2 meters and the steel bar 3 meters the steel bar was corrected
down by 60 %.
2nd setup 3 meter steel
1st setup 2 meter wood
Day
07 time
X
Y Corr X Corr
Y Day 07 time
X Y
21-Mar
1331 2001 259
1200.6 155.4
m21 1305 984 190
21-Mar 1919
2096 253 1257.6
151.8 m21
1917 983 196
22-Mar 757
1935 191 1161
114.6 m22 755
997 195
23-Mar
0 0
24-Mar
0 0
25-Mar 1158
1773 146 1063.8
87.6 m25
1156 1010 335
26-Mar 1128
1839 193 1103.4
115.8 m26
1125 981 349
27-Mar 820
1762 192 1057.2
115.2 m27 819
990 356
28-Mar 700
1743 179 1045.8
107.4 m28 659
994 406
28-Mar 1733
1743 247 1045.8
148.2 m28
1731 996 421
29-Mar 928
1721 231 1032.6
138.6 m29
924 1014 403
30-Mar 812
1679 260 1007.4
156 m30
810 1030 405
Below is a graph of the steel and woode3n bar data with the
steel bar corrected. this is just an early study and i;m trying to get better
resolution with the steel setup but am having difficulty getting the center of
the spot on the CCD. the width and length of the data plots is consistent
however there is a peculair shift of orientation of the 2 plots. the
reason why is not yet figured out. Pink is the wooden and blue the steel
data.
